Welcome to our site HM Homes Powertools. Don"t forget to bookmark this page Cordless Rechargeable Screwdriver.
![]() Black & Decker PIVOTDRIVER™ Cordless Rechargeable Screwdriver US $18.99
|
Cordless Rechargeable Screwdriver
How to Rebuild Batteries for Cordless Power Tools
Modern cordless power tools have the same functionality as cable power tools, and they have the added benefit of total mobility. You can virtually anywhere to use them, because they do not require an electrical outlet. They are also more secure, because to operate them on low voltage of a rechargeable battery supplied. The only problem with cordless power tools is that battery is a limit to the number of which can be recharged. This number varies according to use, but if your power tool works for shorter periods of time between loading operations, needs be rebuilt this power tool batteries.
Take the battery from the tool. Typically requires this unfolding a protective cover or remove one screw, then slipping out of the battery.
Remove the battery cover. With a small screwdriver to remove the screws. If the lid spring clamps, place a small flat blade screwdriver under each clip lock, to overturn it off. The battery cells that your battery tool battery of the form to be visible, if the cover is removed.
Remove each battery cell from the battery. Each battery is either clipped or soldered. If the battery cells, cut off, find every cell with a small screwdriver. If they are soldered, heat a soldering iron, that has a small tip for electrical repairs. Set the iron to melt an insider tip on a battery terminal and the lot. Remove the soldering iron and lift the battery cell from his drawer. Do this quickly, before the solder solidifies. Turn off the iron, if you remove all of the battery cells.
Read a battery cell label its type to determine - nickel-cadmium (NiCd), nickel-metal hydride (NiMH), lithium polymer (LiPo) or lithium-ion (Li-on),such as Makita batteries.
If the type Li-on, to dispose of the Pack by it to a recycling center and a replacement product purchase, to grab. Do not try to rebuild it, because expertise is needed. Li-on battery packs have to stop surge-breakers overload.
Buy the right kind and number of spare batteries if your cells are NiCad, NiMH or LiPo.For example,Makita 1822 battery .
Insert the new battery-cells in the battery using the same method, backed up the original batteries in a pack: push them in place or with a soldering iron, to secure them. Make sure that the battery terminals face the right way. Each section is labeled positive and negative.
Dispose of the old batteries. LiPo batteries are environmentally friendly, wrap it in newspaper and put it in your normal household waste disposal. NiCad and NiMH batteries are not environmentally friendly and must be taken with a recycling center for the safe disposal.
Install the cover on the battery. Turn the screws in place or press the clips click.
Put the battery in your battery tool. Secure it by resealing the protective cover.
About the Author
If you are looking for a different item here are a list of related products on HM Homes Powertools, please check out the following:

















































